1028H11 PISTON CONNECTING ROD SET - R R - Fiat - DUCATO - eLearn

244000683 - 1028H11 PISTON CONNECTING ROD SET - R R

) Op. 1048A31 RIGID PIPE CONNECTING AIR CLEANER TO INLET MANIFOLD RIGID PIPE R R Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1072C10 Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R See in Op. 1092A12 See in Op. 1032D12 See in Op. 1032B14 See in Op. 1016C11 Op. 1024B54 ENGINE FLYWHEEL PROTECTION R R See in Op. 1020A30 Op. 1020A26 CRANKCASE SUMP - R R CLEAN MATING SURFACES AND APPLY SEALANT FOR VEHICLE WITH AIR CONDITIONER See in Op. 1084B281. Undo the bolts and remove the connecting rod caps complete with 2nd and 3rd cylinder lower connecting rod half-bearings.

- Lower the vehicle.1. Withdraw and remove 2nd and 3rd cylinder pistons (1a) with connecting rods (1b) and upper connecting rod half bearings.

- Turn the crankshaft and proceed in the same way to remove the 1st and 4th cylinder pistons and connecting rods.

Refitting ( Removing

) - Fit the 1st and 4th pistons with connecting rods and connecting rod upper bearing halves using a suitable installing tool to compress the piston rings.

	Description	Code	Function
.	Fitting tool	1.860.700.000	Fitting tool

- Fit the connecting rod caps complete with the half-bearings for cylinders no. 1 and 4 and secure them without tightening the bolts to torque.

Fit the connecting rods so that the number stamped on each rod faces towardt he same side as the number stamped on the connecting rods.

- Proceed in the same way to fit the 2nd and 3rd cylinder pistons and connecting rods. See in Op. 1084B28 Op. 1020A26 CRANKCASE SUMP - R R CLEAN MATING SURFACES AND APPLY SEALANT FOR VEHICLE WITH AIR CONDITIONER See in Op. 1020A30 Op. 1024B54 ENGINE FLYWHEEL PROTECTION R R See in Op. 1016C11 See in Op. 1032B14 See in Op. 1032D12 See in Op. 1092A12 Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER See in Op. 1072C10 Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 1048A31 RIGID PIPE CONNECTING AIR CLEANER TO INLET MANIFOLD RIGID PIPE R R Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY