244000822 - 1058A64 CNG SUPPLY PIPE FROM REDUCTION UNIT TO SINGLE MANIFOLD - R&R
Removing
(
Refitting
)
Disconnect the negative battery terminal.Drain the low pressure circuit as described in the operation: Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Unscrew the connectors of the pipe from the pressure reduction unit and single manifold pipe.2. Remove the CNG supply pipe from reduction unit to single manifold.
Refitting
(
Removing
)
Fit the CNG supply pipe and tighten the connectors to the pressure reduction unit and single manifold pipe.
Value daNm
Fastening
Component
Ø
-
2.8
Connector
-
-
Move the CNG cut-off solenoids to open position by hand and check system is efficient.Connect the negative battery terminal.
Removing
(
Refitting
)
Disconnect the negative battery terminal.
Drain the low pressure circuit as described in the operation: Op. 1042A02 METHANE SYSTEM SAFETY SET UP1. Unscrew the connectors of the pipe from the pressure reduction unit and single manifold pipe.2. Remove the CNG supply pipe from reduction unit to single manifold.