Removing
(
Refitting
)
See in Op. 1048A10 See in Op. 1048A21- Identify the pipe and disconnect the rapid connector under the petrol vapour separator.1. Undo the upper filler fixing bolt.2. Move the filler aside.
- Release the pipe from the retaining springs. Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the lower fixing bolt (1a) and move the fuel filler (1b) aside.2. Act on the band (2a) and release the petrol vapour pipe (2b).- Release the fuel vapour pipe from the retaining spring and remove it.
Refitting
(
Removing
)
- Fit the fuel vapour pipe in place.- Fit the pipe removed previously and restore the fastening.- Tighten the lower fuel filler fixing bolt.- Lower the vehicle.- Connect the rapid connector at the bottom of the petrol vapour separator.- Tighten the upper filler fixing bolt. See in Op. 1048A21 See in Op. 1048A10
Removing
(
Refitting
)
See in Op. 1048A10 See in Op. 1048A21- Identify the pipe and disconnect the rapid connector under the petrol vapour separator.1. Undo the upper filler fixing bolt.2. Move the filler aside.
