244000925 - 1084B10 ENGINE OIL PUMP - R + R WITH CRANKCASE SUMP REMOVED

Removing ( Refitting )     Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R See in Op. 1092A12 See in Op. 1032D12 See in Op. 1032B14 See in Op. 1032B44 See in Op. 1092G15    Op. 5530A14 ALTERNATOR - R+R FOR VERSIONS WITH AIR CONDITIONER    Op. 5530A40 ALTERNATOR BRACKETS/MOUNT/SPACER - R R1. Undo the bolts securing the front crankshaft oil seal cover.2. Remove the front crankshaft oil seal cover from its seat.
1. Undo the fixing bolts.2. Remove the oil pump (2a) complete with drive chain (2b), pinion (2c) and tab.
Refitting ( Removing ) - Fit the engine oil pump tightening the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.1,5BoltENGINE OIL PUMP-
- Fit the chain, the pinion and the pinion fastening tabs.- Remove the oil sealing ring from its seat on the front cover.
Because the oil seal must always be replaced, it may be destroyed when it is removed.
- Apply sealant to the front cover.
DescriptionQty.ComponentTypeClassification
.DOW CORNING 7091-FRONT COVER CRANKSHAFTSilicone sealant-
- Fit the cover and tighten the bolts to the recommended torque.
Value - daNmFasteningComponentØ  
.1,5BoltFRONT COVER CRANKSHAFT-
1. Fit the seal using the tool.
DescriptionCodeFunction
1Fitting tool1.860.855.000Fitting crankshaft front oil seal
    Op. 5530A40 ALTERNATOR BRACKETS/MOUNT/SPACER - R R    Op. 5530A14 ALTERNATOR - R+R FOR VERSIONS WITH AIR CONDITIONER See in Op. 1092G15 See in Op. 1032B44 See in Op. 1032B14 See in Op. 1032D12 See in Op. 1092A12    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R    Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER    Op. 7055B54 UNDER-ENGINE GUARD - R R