244001013 - 1820B30 SLAVE CYLINDER - R + R

Removing ( Refitting ) - Position the vehicle on a lift.- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained. See in Op. 1048A21    Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R1. Lift up the spring (1a) and disconnect the pipe (1b) from the clutch release cylinder.- Release the pipe from the securing bands.2. Undo the fixing bolts and remove the actuator operating cylinder from the engine compartment. Refitting ( Removing ) - Fit the clutch release cylinder on the gearbox and tighten the fixing nuts to torque.- Connect the fluid pipe to the hydraulic clutch release cylinder.    Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R See in Op. 1048A21    Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR