244001091 - 3320B20 REAR BRAKE SHOE CYLINDER (ONE) LEFT OR RIGHT - REPLACE.

Removing ( Refitting )     Op. 3320B30 LH OR RH REAR BRAKE DRUM (ONE) R R1. Position the special tool on the shoe control cylinder.

	Description	Code	Function
1	Retainer	1.872.257.000	Drum brake cylinder locking

1. Undo the connector for the brake pipe.2. Undo the bolts fixing the shoe control cylinder. 1. Remove the shoe control cylinder (1a) and, if necessary, separate it from the tool (1b). 1. If necessary, check the shoe control cylinder components.- When overhauling, always replace the seals and the protective boots; if there are faults in the cylinder casing or the pistons, replace the assembly.- Make sure that the bleed screw is not obstructed. Refitting ( Removing ) - If it has been removed, position the special tool on the shoe control cylinder.

	Description	Code	Function
.	Retainer	1.872.257.000	Drum brake cylinder locking

- Place the shoe control cylinder in position and secure it using the bolts.- Tighten the connector for the brake pipe.

	Value - daNm	Fastening	Component	Ø
.	1.2 -2.2 daNm	Nut	BRAKING SYSTEM PIPE CONNECTORS	M10x1

- Remove the tool from the shoe control cylinder.    Op. 3320B30 LH OR RH REAR BRAKE DRUM (ONE) R R    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR- Check that the brakes are working.