244001132 - 3340A34 RPM SENSOR (ONE) OF ONE L/H OR R/H REAR WHEEL - R+R

Removing ( Refitting ) - Position the vehicle on the lift.- Raise the vehicle.1. Working underneath the vehicle, disconnect the electrical connection.

	Description	Connector
1	Left rear wheel sensor for ABS	K075

	Description	Connector
1	Right rear wheel sensor for ABS	K076

2. Release the electrical wiring for the ABS sensor from the retainers.3. Undo the bolt (3a) and remove the ABS sensor and wiring (2b). Refitting ( Removing ) - Check that the ABS sensor and wiring is not damaged.- Position the ABS sensor in the housing.- Tighten the ABS sensor bolt.

	Value - daNm	Fastening	Component	Ø
.	0.8	Bolt	REAR A.B.S. SENSOR	M6

- Fasten the electrical wiring for the ABS sensor to the retainers.- Connect the electrical connection.

	Description	Connector
.	Left rear wheel sensor for ABS	K075

	Description	Connector
.	Right rear wheel sensor for ABS	K076

- Remove the vehicle from the lift.- Check the operation of the braking system using the Examiner or other diagnostic equipment.