1008A46 CAM SHAFT LEFT RIGID MOUNT - R R - Fiat - DUCATO - eLearn

244000630 - 1008A46 CAM SHAFT LEFT RIGID MOUNT - R R

) Op. 7055B54 UNDER-ENGINE GUARD - R R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R Op. 5530A10 ALTERNATOR - R+R- Lower the vehicle.- Position a hydraulic arm beneath the engine oil sump to support the power unit.1. Undo the bolts and the nut securing the flexible mount to the rigid power unit mount on the engine.2. Undo the nuts securing the engine block to the bodyshell.3. Remove the flexible block from the engine compartment.

1. Undo the bolts securing the rigid mount to the cylinder block/crankcase.2. Undo the bolt securing the rigid engine mount to the cylinder block/crankcase.3. Remove the gearbox side rigid engine mount.

Refitting ( Removing

) - Fit gearbox side rigid engine mount.- Tighten the bolt securing the rigid engine mount to the cylinder block/crankcase to torque.

	Value - daNm	Fastening	Component	Ø
.	5	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M10X1.5

- Tighten the bolts securing the rigid engine mount to the cylinder block/crankcase to torque.

	Value - daNm	Fastening	Component	Ø
.	5	Bolt	RIGID ENGINE MOUNT, TIMING SIDE	M10X1.5

- Fit the flexible block in its seat in the engine bay.- Tighten the nuts securing the engine block to the body to torque.

	Value - daNm	Fastening	Component	Ø
.	(body block) 5	Nuts	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10

- Tighten the nut and both bolts securing the flexible block to the rigid power unit mount, timing side.

	Value - daNm	Fastening	Component	Ø
.	(Rigid mount on engine) 5	Bolt	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M10

	Value - daNm	Fastening	Component	Ø
.	(Rigid mount on engine) 8	Nut	FRONT FLEXIBLE MOUNTING BLOCKS, POWER UNIT	M12

- Lower the vehicle. Op. 5530A10 ALTERNATOR - R+R Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R Op. 4450B04 RIGHT FRONT WHEEL R R Op. 7055B54 UNDER-ENGINE GUARD - R R