244000654 - 1020A24 CRANK CASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION WITH ENGINE REMOVED
Removing
(
Refitting
)
See in Op. 1004D401. Undo the bolts (1a) and remove the engine block sump (1b).- Separate the metal frame and the seal from the sump.
Refitting
(
Removing
)
- Clean the matching surfaces between- Position the crankcase sump with the gasket and the metal frame and secure it tightening the bolts to the recommended torque. | Check the condition of the seal and replace it if necessary. |
 | Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| . | 2.5 | Bolt | OIL SUMP | M8 X 1.25 |
| Value - daNm | Fastening | Component | Ø |
|---|---|---|---|---|
| . | 1.5 | Bolt | OIL SUMP | M6 X 1 |