244000664 - 1020D40 FLYWHEEL END OIL SEAL- R+R WITH FLYWHEEL REMOVED
Removing
(
Refitting
)
1. Use the tool described below to fit the oil sealing ring.2. Position the tool extraction pincers (2a) into oil sealing ring grooves (2b).3. Secure the extraction pincers in position using retaining bolts.4. Tighten the tool pin to remove the oil sealing ring from its seat. | Because the oil seal must always be replaced, it may be destroyed when it is removed. |
 | Description | Code | Function |
|---|---|---|---|
| 1 | Extractor | 99340058 | Front cover gasket removal |
Refitting
(
Removing
)
1. Use the tool described below to fit the oil sealing ring.2. Apply plate (2a) to the crankshaft and secure using retaining bolts (2b).- Position the new oil sealing ring in its seat3. Position fitting tool (3) in contact with the oil sealing ring and tighten into nut (3b) to fully fit the oil seal into its seat on the crankshaft. | Description | Code | Function |
|---|---|---|---|
| 1 | Fitting tool | 99346255 | Flywheel end crankshaft seal fitting |
