244000688 - 1028H54 PISTON/CYLINDER LINER - R R

Removing ( Refitting ) - Remove the seals (1a) from the piston using the tool (1b).
DescriptionCodeFunction
1bExtractor/Fitting tool1.860.183.000Extracting/fitting piston circlips
1. Using a suitable tool, remove the seals (1a) then extract the gudgeon pin (1b) from the piston.2. Separate the connecting rod (2a) from the piston (2b).
Refitting ( Removing ) - Join the connecting rods to the pistons, fit the gudgeon pins and secure them using the circlips.- Fit the piston rings on the piston using the special tool with the word TOP in the correct position.
DescriptionCodeFunction
.Extractor/Fitting tool1.860.183.000Extracting/fitting piston circlips
When the fitting is completed position the references on the piston rings so that they are not aligned with the gudgeon pin axis and are 120° offset from one another.