244000730 - 1036L32 FRONT OIL SEAL INTAKE CAMSHAFT IN CYLINDER HEAD EXTENSION REPLACE WITH TIMING BELT REMOVED

Removing ( Refitting ) - Remove the oil seal from its seat on the intake manifold shaft.
When removing, take care not to scratch the camshaft and its seat.
Refitting ( Removing ) 1. Use the tool to fit a new oil seal to the intake side camshaft. Tighten the tool screw to bring the oil seal into contact with the seat in the head extension.
DescriptionCodeFunction
1Fitting tool1.870.854.000Introduction of new oil seal