244000836 - 1060F10 FUEL INJECTORS

Removing ( Refitting ) 1. Undo the bolts fixing the power assisted steering system reservoir mounting bracket.2. Remove the power assisted steering fluid reservoir, complete with bracket, from the housing.
1. Disconnect the bands retaining the coolant pipe to the reservoir.2. Release the electrical connection for the coolant reservoir from the housing.3. Undo the nuts fixing the expansion tank and move it away from the work area.
See in Op. 1060F36- Disconnect the electrical connections for the injectors.
DescriptionConnector
.InjectorN070A
DescriptionConnector
.InjectorN070B
DescriptionConnector
.InjectorN070C
DescriptionConnector
.InjectorN070D
1. Press the fastening springs (1a) and disconnect the fuel recirculation pipe (1b) from the injectors.2. Undo the bolts fixing the brackets.3. Using the extractor (3a) and the special tool (3b), remove the injectors (3c) from the seats in the camshaft housing.
DescriptionCodeFunction
3aExtractor1.870.850.000Injector removal
DescriptionCodeFunction
3bMallet1.840.206.001Injector removal
Refitting ( Removing ) - Fit the injectors in the seats in the camshaft housing.
To improve the operation of the engine and guarantee the emission limits, an injector classification criterion has been introduced. If the injectors are replaced the following must be taken into account:
- Tighten the bolts fixing the brackets.
Value - daNmFasteningComponentØ  
.2.5BoltINJECTORS(DIESEL)M8
- Fasten the recirculation pipe on the injectors using securing bands. See in Op. 1060F36- Connect the electrical connections disconnected previously.
DescriptionConnector
.InjectorN070A
DescriptionConnector
.InjectorN070B
DescriptionConnector
.InjectorN070C
DescriptionConnector
.InjectorN070D
- Fit the engine coolant reservoir and tighten the nuts fixing it to the bodyshell.- Fasten the electrical connection in the housing on the tank.- Connect the bands retaining the coolant pipes to the cylinder head and the radiator.- Fit the power assisted steering fluid reservoir complete with bracket and tighten the fixing bolts.