244000841 - 1060F50 FUEL RETURN MANIFOLD - R R

Removing ( Refitting )     Op. 7055B54 UNDER-ENGINE GUARD - R R1. Undo the connectors (1a), (1b) and (1c) for the fuel connectors from the pressure pump.- Disconnect the electrical connection for the rpm sensor to facilitate the removal of the pipes from the housing.
DescriptionConnector
.Rpm sensorK046
- Lower the vehicle.1. Undo the connector from the single fuel manifold.
1. Disconnect the rapid connectors for the supply pipe from the filter and the return pipe to the tank.
1. Undo the bolts fixing the manifold pipe to the cylinder head.2. Remove the return manifold pipe complete with fuel pipes.
The return manifold pipe is supplied as spares complete with fuel pipes.
Refitting ( Removing ) - Fit the return manifold pipe complete with fuel pipes.- Tighten the bolts fixing the manifold pipe to the cylinder head.- Connect the rapid connectors for the supply pipe from the filter and the return pipe to the tank.- Tighten the connector for the fuel return pipe from the single fuel manifold.- Raise the vehicle.- Position the pipes in the housing and tighten the connectors fixing the three pipes to the pressure pump.- Connect the electrical connection for the rpm sensor.
DescriptionConnector
.Rpm sensorK046
    Op. 7055B54 UNDER-ENGINE GUARD - R R