1060G14 ENGINE COOLANT TEMPERATURE SENSOR - R R - Fiat - DUCATO - eLearn

244000844 - 1060G14 ENGINE COOLANT TEMPERATURE SENSOR - R R

) 1. Undo the bolts fixing the power assisted steering fluid reservoir mounting bracket.2. Move the power assisted steering fluid reservoir complete with bracket.

1. Disconnect the electrical connection for the right front light cluster.

	Description	Connector
.	Right headlamp	F011

2. Disconnect the bands at the two ends and remove the air pipe from the air/air heat exchanger to the intake manifold.

1. Disconnect the electrical connection for the coolant temperature sensor.

	Description	Connector
1	Engine coolant temperature sensor/sender unit	K036

2. Using a 19 mm diameter bush, undo and the coolant temperature sensor and remove it.

Refitting ( Removing

) - Fit the coolant temperature sensor and tighten it in the housing on the thermostat.- Connect the electrical connection for the coolant temperature sensor.

	Description	Connector
.	Engine coolant temperature sensor/sender unit	K036

- Fit the air pipe from the air/air heat exchanger to the intake manifold.- Cconnect the electrical connection for the right front light cluster.

	Description	Connector
.	Right headlamp	F011

- Fit the power assisted steering fluid reservoir complete with bracket.- Tighten the bolts fixing the power assisted steering fluid reservoir mounting bracket.