244000847 - 1060G20 RPM AND TIMING SENSOR - R R

Removing ( Refitting ) - Disconnect the negative battery terminal.    Op. 7055B54 UNDER-ENGINE GUARD - R R1. Disconnect the electrical connection for the rpm sensor.
DescriptionConnector
Rpm sensorK046
1. Undo the bolt fixing the rpm sensor.2. Remove the rpm sensor from the housing in the cylinder block/crankcase.
Refitting ( Removing ) - Fit the rpm sensor in the special housing and tighten the fixing bolt.- Connect the electrical connection for the rpm sensor.
DescriptionConnector
.Rpm sensorK046
    Op. 7055B54 UNDER-ENGINE GUARD - R R- Connect the negative battery terminal.