244000873 - 1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL

Removing ( Refitting ) See in Op. 1060F201. Disconnect the electrical connections:
DescriptionConnector
1aInjectorN070A
DescriptionConnector
1aInjectorN070B
DescriptionConnector
1aInjectorN070C
DescriptionConnector
1aInjectorN070D
DescriptionConnector
1bFuel pressure sensorK083
DescriptionConnector
1cAir pressure - temperature sensorK044
DescriptionConnector
.Heater plugsA040A
DescriptionConnector
.Heater plugsA040B
DescriptionConnector
.Heater plugsA040C
DescriptionConnector
.Heater plugsA040D
DescriptionConnector
1dTiming sensorK047
DescriptionConnector
1eCoolant temperature sending unit (for instrument panel)K035
DescriptionConnector
1fEngine coolant temperature sensor/sender unitK036
DescriptionConnector
1gFuel pressure regulatorN077
- Release the wiring from the bands and move it to the side.
1. Undo the fixing bolt (1a) and remove the engine oil dipstick pipe (1b).
1. Undo the connector (1a) and disconnect the fuel pipe (1b) from the fuel manifold.
1. Undo the lower fixing bolts (1a) joining the intake manifold to the bracket for the rigid water supply pipes (1b) from the thermostat.2. Undo the bolt fixing the water supply pipe to the pump.3. Undo the fixing bolts (3a) and remove the air intake manifold (1b).- Recover the underlying gasket.
Refitting ( Removing ) - Fit the new metal rubber intlet manifold gasket.- Fit the intake manifold.- Tighten the bolts fixing the intake manifold to the cylinder head to torque.
Value - daNmFasteningComponentØ  
.2.5BoltsINLET MANIFOLDM8
- Tighten the bolt fixing the pump water supply rigid pipe bracket to the intake manifold.- Tighten the bolt fixing the engine oil dipstick pipe.- Screw in the connector for the return pipe from the single fuel manifold to the return manifold and tighten it to torque.
Value - daNmFasteningComponentØ  
.4ConnectorINJECTOR FUEL MANIFOLD (DIESEL)M16
- Position the injection wiring and connect the electrical connections disconnected previously.
DescriptionConnector
.InjectorN070A
DescriptionConnector
.InjectorN070B
DescriptionConnector
.InjectorN070C
DescriptionConnector
.InjectorN070D
DescriptionConnector
.Fuel pressure sensorK083
DescriptionConnector
.Air pressure - temperature sensorK044
DescriptionConnector
.Heater plugsA040A
DescriptionConnector
.Heater plugsA040B
DescriptionConnector
.Heater plugsA040C
DescriptionConnector
.Heater plugsA040D
DescriptionConnector
.Timing sensorK047
DescriptionConnector
.Fuel pressure regulatorN077
See in Op. 1060F20