244000905 - 1080D10 PIPE CARRYING ENGINE OIL VAPOURS FROM INTAKE TO SEPARATOR - R + R
Removing
(
Refitting
)
See in Op. 1048A21- Disconnect the pipe connected to the hose from the filter casing to the turbocharger.1. Undo the bolt fixing the rigid connector to the rigid air supply pipe to the heat exchanger.2. Disconnect the pipe from the separator, lifting the fastening spring.3. Remove the engine oil vapour pipe.
Refitting
(
Removing
)
- Fit the oil vapour pipe in the housing and secure it to the separator using the spring.- Tighten the bolt fixing the vapour pipe to the rigid air supply pipe to the heat exchanger.- Connect the flexible pipe connected to the hose from the filter casing to the turbocharger to the rigid connector. See in Op. 1048A21
Removing
(
Refitting
)
See in Op. 1048A21- Disconnect the pipe connected to the hose from the filter casing to the turbocharger.1. Undo the bolt fixing the rigid connector to the rigid air supply pipe to the heat exchanger.2. Disconnect the pipe from the separator, lifting the fastening spring.3. Remove the engine oil vapour pipe.