4CarData
eLearn
Контакты
English
Russian
da 03/05
fino a 02/05
FIAT
DUCATO
2.3 JTD 16V
PROCEDURES
10 ENGINE UNIT
1088 ENGINE COOLING
1088D COOLANT HOSES AND SLEEVES
1088D51 COOLANT SUPPLY PIPE FROM CRANKCASE TO OIL/WATER HEAT EXCHANGER - R.R. WITH REAR ENGINE SUPPORT REMOVED
244000965 - 1088D51 COOLANT SUPPLY PIPE FROM CRANKCASE TO OIL/WATER HEAT EXCHANGER - R.R. WITH REAR ENGINE SUPPORT REMOVED
Removing
(
Refitting
)
- Position the vehicle on the lift.
Op. 7055B54 UNDER-ENGINE GUARD - R R
- Disconnect the lower radiator pipe.
Collect the coolant in a suitable container.
1. Remove the coolant outlet pipe by disconnecting the collars securing the end to the heat exchanger and the rigid pipe.
Refitting
(
Removing
)
- Fit the coolant outlet pipe by connecting the collars securing the end to the heat exchanger and the rigid pipe.
- Connect the lower radiator pipe.
Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY
Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY
Op. 7055B54 UNDER-ENGINE GUARD - R R
- Remove the vehicle from the lift.