244000987 - 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R

Removing ( Refitting ) - Position the vehicle on the lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 4450B04 RIGHT FRONT WHEEL R R1. Adjust the mobile tensioner to slacken the single engine component drivebelt2. Remove the auxiliary shaft drive belt. Refitting ( Removing ) - Fit the single drive belt on the pullies.

Avoid the belt coming into contact with oil or solvents that could alter the flexibility of the rubber with a resulting loss of adhesion. Also check that the belt shows no signs of cracks or cuts or else it will have to be replaced.

- The tensioning device is automatic and uses a preset spring to set the correct tension upon assembly and automatically take up any wear that arises during normal service.- Adjust the automatic tensioner and move to maximum preload position, fit the auxiliary drivebelt and slowly release the tensioner.    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift.