244001171 - 4130B20 POWER STEERING PUMP R R

Removing ( Refitting ) - Position the vehicle on the lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R    Op. 5530A10 ALTERNATOR - R+R1. Disconnect the oil pipe from the power steering pump and drain the power steering system into a suitable container.- Reconnect the power steering fluid pipe.
1. Undo the fixing nuts (1a) and separate the ridid middle section of the exhaust pipe from the turbocharger hose flange (1b).2. Undo the bolts fixing the rear flange (2a) and remove the rigid middle section (2b) of the exhaust pipe.
1. Undo the connector (1a), break the band (1b) and disconnect the fluid pipes from the power assisted steering pump.
1. Undo the fixing bolt.2. Remove the auxiliary drivebelt mobile tensioner.
1. Undo the fixing bolts (1a) and remove the power assisted steering pump complete with support and pulley (1b).
Refitting ( Removing ) - Fit the power assisted steering pump complete with support and pulley and tighten the fixing bolts to torque.
Value - daNmFasteningComponentØ  
.2,5BoltPOWER STEERING PUMPM8
- Fit the auxiliary drivebelt mobile tensioner.- Tighten the mobile tensioner retaining bollt to torque.
Value - daNmFasteningComponentØ  
.2.5BoltALT./AUXILIARY DRIVEBELT MOBILE VARIOUSM8
- Connect the two fluid pipes to the power assisted steering pump.- Fit the exhaust pipe attachment to the engine.- Tighten the bolts fixing the flange to the rear exhaust silencer.
Value - daNmFasteningComponentØ  
.2,6BoltsREAR SILENCER EXHAUSTM8
- Tighten the nuts fixing the exhaust pipe to the turbocharger to torque.
Value - daNmFasteningComponentØ  
.2.6NutsEXHAUST PIPE TO ENGINEM8
    Op. 5530A10 ALTERNATOR - R+R    Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 0010T70 POWER ASSISTED STEERING FLUID - REPLACE