244001351 - 5520B10 STARTER MOTOR - R+R

Removing ( Refitting ) - Position the vehicle on the lift.    Op. 7055B54 UNDER-ENGINE GUARD - R R- Disconnect the negative battery terminal.- Raise the vehicle.1. Undo the nut (1a), remove the protective cover (1b) and disconnect the starter motor supply leads (1c).
DescriptionConnector
1cBatteryA001A
DescriptionConnector
1cAlternatorA010B
2. Undo the retaining bolts (2a) and remove the starter motor (2b), complete with spacer (2c).
Refitting ( Removing ) - Position the starter motor spacer. - Connect the starter motor electrical wiring and close the protective cover.
DescriptionConnector
.AlternatorA010A
DescriptionConnector
.BatteryA001B
- Lower the vehicle.- Connect the negative battery terminal.    Op. 7055B54 UNDER-ENGINE GUARD - R R- Remove the vehicle from the lift. - Fit the starter motor and tighten the retaining bolts to torque.
Value - daNmFasteningComponentØ  
.2BoltSTARTER MOTORM8