244001359 - 5530A10 ALTERNATOR - R+R

Removing ( Refitting ) - Disconnect the negative battery terminal.1. Undo the bolts securing the power steering fluid reservoir bracket.2. Remove the power assisted steering fluid reservoir complete with bracket without disconnecting the fluid pipes.
1. Disconnect the band securing the fluid pipes to the reservoir.2. Release the electrical connection shown from the connection on the reservoir.3. Undo the nuts fixing the expansion tank.4. Remove the expansion tank.
1. Disconnect the electrical connection for the voltage regulator on the alternator.
DescriptionConnector
1AlternatorA010A
- Disconnect the remaining electrical wiring from the alternator.
DescriptionConnector
.AlternatorA010B
    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R1. Undo the upper bolt fixing the alternator.2. Loosen the lower alternator retaining bolts.3. Remove the alternator from the lower part of the engine compartment.
Refitting ( Removing ) - Fit the alternator via the lower part of the engine compartment.- Tighten the lower alternator retaining bolts.- Tighten the upper bolt fixing the alternator.- Tighten the alternator retaining bolts.
Value - daNmFasteningComponentØ  
.(Lower) 4.9BoltALTERNATOR ASSEMBLYM10
- Tighten the upper alternator retaining bolt to torque.
Value - daNmFasteningComponentØ  
.(upper) 4.9BoltALTERNATOR ASSEMBLYM10
    Op. 1092B72 POWER STEERING PUMP DRIVE BELT - ALTERNATOR - R&R    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 7055B54 UNDER-ENGINE GUARD - R R- Connect the electrical connection for the voltage regulator on the alternator.
DescriptionConnector
.AlternatorA010A
- Disconnect the remaining electrical wiring from the alternator.
DescriptionConnector
.AlternatorA010B
- Fit the engine coolant reservoir and tighten the nuts fixing it to the bodyshell.- Fasten the electrical connection in the housing on the tank.- Connect the band retaining the coolant pipe to the cylinder head.- Fit the power steering fluid reservoir complete with bracket.- Tighten the bolts fixing the power assisted steering fluid reservoir mounting bracket to the crossmember.- Connect the negative battery terminal.