244001042 - 2125C10 TRANSMISSION HAND CONTROL ASSEMBLY - ADJUSTMENT/INSPECTION AND EV. LUBIRCATION OF FIXINGS

- Position the vehicle on the lift.- Place the gearbox in neutral.    Op. 7055B54 UNDER-ENGINE GUARD - R R1. Place a 10 mm shim under the reverse gear engagement lever. - Lower the vehicle.    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R.1. Lower the lever (1a) and push the button (1b) forwards as far as the splining (1c). 1. Release the lever (1a) so as to lock the button (1b). - Engage fifth speed.1. Lower the lever (1a) and release the button (1b) from the splining (1c). - Disengage fifth speed and engage first speed.1. Lower the lever (1a) and push the button (1b) forwards as far as the splining (1c). - Release the lever (1a) so as to lock the button (1b). 1. Position a 1.2 mm shim between the gear lever and the barrier. - Send the gear lever into the end of travel position against the shim.1. Lower the lever (1a) and release the button (1b) from the splining (1c). - Raise the vehicle.- Remove the shim positioned previously under the reverse gear release lever.    Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle.- Remove the shim positioned previously from the gear lever.    Op. 7040A28 TRIM ON GEARBOX CONTROL PANEL - R.R.- Remove the vehicle from the lift.