244001015 - 1820B45 RIGID DELIVERY PIPE FROM MASTER CYLINDER (PUMP) - R R FOR RHD VER SIONS

Removing ( Refitting ) - Disconnect the negative battery lead.
DescriptionConnector
.BatteryA001B
    Op. 1016A10 SOUND-PROOFING COVER - R + R- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.- Proceed from the inside of the passenger compartment.1. Working from inside the vehicle, act on the locking spring (1a) and disconnect the rigid pipe (1b) from the master cylinder (pump).
    Op. 1076B50 EXHAUST PIPE ATTACHMENT TO ENGINE - R + R    Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R    Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS1. Open the retaining clips (1a) and release the rigid pipe (1b) on the bodyshell.
1. Open the retaining clip (1a), undo the connector (1b), then remove the rigid pipe (1c) from the vehicle.
Refitting ( Removing ) - Place the rigid pipe in the vehicle and tighten the connector to the flexible pipe.
Value - daNmFasteningComponentØ  
.1,6ConnectorRIGID PIPE FROM CLUTCH MASTER CYLINDERM10
- Close the rigid pipe retaining clips on the bodyshell.    Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS    Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R    Op. 1076B50 EXHAUST PIPE ATTACHMENT TO ENGINE - R + R- Connect the rigid pipe to the master cylinder securing it using the spring.    Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR    Op. 1016A10 SOUND-PROOFING COVER - R + R- Connect the negative battery lead.
DescriptionConnector
.BatteryA001B