244001082 - 3310A60 FRONT BRAKE PADS - REPLACE

Removing ( Refitting ) - Remove the front wheel.- Steer towards the outside.1. Disconnect the brake pipe bands from the support.2. Disconnect the electrical connection for the brake pad wear sensor.
DescriptionConnector
2Left brake pad wear sensor (switch)K020
3. Undo the bolts fixing the brake caliper.
The bolts fixing the brake caliper are self-locking and should always be replaced each time they are undone or loosened.
4. Move the brake caliper slightly without disconnecting the brake pipes.
1. Remove the brake pads.
The brake pads should be replaced if the friction material is less than 1.5 mm thick.
Check that the same type of brake pads are fitted to each pair of wheels.
Refitting ( Removing ) - Place the brake pads in position.- Place the brake caliper in position.- Tighten the bolts fixing the brake caliper.- Connect the electrical connection for the brake pad wear sensor.
DescriptionConnector
.Left brake pad wear sensor (switch)K020
- Connect the brake pipe bands to the support.- Refit the wheel.- Check that the brakes are working.