244001143 - 3340B92 CONNECTOR AT REAR SUSPENSION AXLE FOR REAR BRAKE PIPES - R.R.

Removing ( Refitting ) - Position the vehicle on the lift.- Remove the protective cap from the bleed valve on the rear brake caliper.- Connect the recovery device (pipe and reservoir) to the rear brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.    Op. 3340B34 INTERMEDIATE FLEXIBLE PIPE (ONE), LEFT OR RIGHT, TO THE REAR BRAKES - R.R.1. Undo the nut fixing the connector at the rear suspension axle for the rear brake pipes on the rear suspension axle.2. Release the bracket and cables for the ABS sensors.3. Undo the rigid pipe connectors at the rear suspension axle. - Release the rigid pipes at the rear suspension axle from the springs.1. Remove the connector at the rear suspension axle for the rear brake pipes. Refitting ( Removing ) - Fit the rigid pipes at the rear suspension axle to the springs.- Fasten the connector at the rear suspension axle for the rear brake pipes.- Tighten the rigid pipes to the rear suspension axle.- Secure the ABS sensor cables    Op. 3340B34 INTERMEDIATE FLEXIBLE PIPE (ONE), LEFT OR RIGHT, TO THE REAR BRAKES - R.R.    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR- Remove the vehicle from the lift.- Test the operation of the braking system.