244000614 - 0520G65 ACCELERATOR CONTROL PEDAL - ADJUST END TRAVEL WITH FDC

- Connect the tester station (EXAMINER or SDC) to the socket in the engine compartment.- Move the accelerator pedal to the end of its travel (fully depressed).- Record the accelerator pedal potentiometer output voltage.

	Subject	Value
.	Accelerator pedal	Volt
-	Potentiometer output voltage	3.5 ÷ 4.4

- If the value recorded is not within the recommended limits, replace the accelerator pedal complete with potentiometer.- Disconnect the diagnostic equipment socket from the connector in the engine compartment.