244000697 - 1032B44 TOOTHED DRIVE PULLEY - R + R WITH TIMING BELT REMOVED

Removing ( Refitting )     Op. 1020D10 FRONT CRANK SHAFT OIL SEAL COVER - R + R AND REPLACE SEALS WITH TIMING BELT REMOVED1. Make two millings on the toothed drive pulley (1a) and remove the pulley using a suitable extractor (1b). Refitting ( Removing ) - Place the toothed drive pulley in the oven.1. Fit the drive pulley ensuring that the groove (1a) coincides with the key (1b). - Take the pulley out of the oven using suitable pliers and fit it on the crankshaft with the help of a drift.

do not exceed 350°C.

    Op. 1020D10 FRONT CRANK SHAFT OIL SEAL COVER - R + R AND REPLACE SEALS WITH TIMING BELT REMOVED