244000701 - 1032B47 TOOTHED DRIVE PULLEY - R R FOR VERSIONS WITH AIR CONDITIONER
Removing ( Refitting ) - Disconnect the negative battery terminal. Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1008B10 See in Op. 1032D12 See in Op. 1032B14 Op. 1020D10 FRONT CRANK SHAFT OIL SEAL COVER - R + R AND REPLACE SEALS WITH TIMING BELT REMOVED1. Make two millings on the toothed drive pulley (1a) and remove the pulley using a suitable extractor (1b).
Refitting
(
Removing
)
- Place the toothed drive pulley in the oven.1. Fit the drive pulley ensuring that the groove (1a) coincides with the key (1b).
- Take the pulley out of the oven using suitable pliers and fit it on the crankshaft with the help of a drift.
do not exceed 350°C. |