Removing
(
Refitting
)
- Position the vehicle on the lift.1. Open the fastening spring.2. Disconnect the electrical connection.
Description
Connector
2
Rpm sensor
K046
- Raise the lift.1. Undo the bolts fixing the sensor protective cover.
- With the sensor at the bench.1. Undo the fixing bolts (1a) and separate the sensor (1b) from the protective cover (1c).
Refitting
(
Removing
)
- Position the sensor on the protective cover and tighten the fixing bolt.- Position the sensor and protective cover assembly in place and tighten the fixing bolts.- Lower the lift.- Connect the electrical connection and secure it using the fastening spring.
Removing
(
Refitting
)
- Position the vehicle on the lift.1. Open the fastening spring.2. Disconnect the electrical connection.
