244000853 - 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R

Removing ( Refitting ) See in Op. 1048A10- Disconnect the negative battery terminal.
DescriptionConnector
1Engine management control unitM010A
DescriptionConnector
1Engine management control unitM010B
1. Disconnect the electrical connections for the injection control unit.2. Undo the fixing bolts.3. Remove the engine management control unit from its housing.
Refitting ( Removing ) - Position the control unit in the housing.- Connect the electrical connections for the control unit.
DescriptionConnector
.Engine management control unitM010A
DescriptionConnector
.Engine management control unitM010B
- Connect the negative battery terminal.
If the engine management control unit is being replaced, the control unit learning procedure must be carried out at the end of the fitting operation.
See in Op. 1048A10