244000872 - 1072B11 INTAKE MANIFOLD - R R AND REPLACE GASKET FOR VERSIONS WITH AIR CONDITIONER

Removing ( Refitting )     Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY See in Op. 1088B10 See in Op. 1080C17 See in Op. 1080C16 See in Op. 1048A21 See in Op. 1048B22 See in Op. 1048B14    Op. 1088D67 COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R.1. Undo the fixing bolts (1a) and move the power assisted steering reservoir complete with bracket (1b) away from the work area.
See in Op. 1016A10    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1080C10    Op. 1080C50 PIPE CARRYING EXHAUST GAS TO E.G.R. VALVE - R + R See in Op. 1080C801. Undo the fixing nuts (1a) and remove the intake manifold (1b).
Refitting ( Removing ) - Fit a new intake manifold gasket in place.- Fit the intake manifold in position and tighten the fixing nuts checking the torque.
Value - daNmFasteningComponentØ  
.2,5NutINLET MANIFOLDM8
See in Op. 1080C80    Op. 1080C50 PIPE CARRYING EXHAUST GAS TO E.G.R. VALVE - R + R See in Op. 1080C10    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1016A10    Op. 1088D67 COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R. See in Op. 1048B14 See in Op. 1048B22 See in Op. 1048A21 See in Op. 1080C16 See in Op. 1080C17 See in Op. 1088B10    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY- Position the power assisted steering fluid reservoir and tighten the bolts fixing it to the crossmember.