Removing
(
Refitting
)
- Position the vehicle on a lift.- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo the bolts fixing the cold air intake to the upper crossmember.2. Disconnect the intake hose from the air filter casing.3. Remove the cold intake and intake hose assembly from the engine compartment.
1. Disconnect the band fastening the air supply hose to the turbocharger.2. Disconnect the vapour recovery pipe from the air supply hose to the turbocharger.3. Disconnect the band from the air filter casing (3a) and remove the air supply hose to the turbocharger (3b).
1. Lift up the spring (1a) and disconnect the pipe (1b) from the clutch release cylinder.- Release the pipe from the securing bands.2. Undo the fixing bolts.3. Remove the actuator operating cylinder from the engine compartment.
Refitting
(
Removing
)
- Fit the clutch release cylinder on the gearbox and tighten the fixing bolts to torque.- Connect the fluid pipe to the hydraulic clutch release cylinder.- Fit the air supply hose to the turbocharger and connect the two ends to the filter casing and to the actual turbocharger.- Connect the vapour recovery pipe to the air supply hose to the turbocharger.- Fit the cold intake and intake hose assembly in the engine compartment.- Connect the intake hose to the air filter casing.- Tighten the bolts fixing the cold air intake to the upper crossmember. Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR
Removing
(
Refitting
)
- Position the vehicle on a lift.- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo the bolts fixing the cold air intake to the upper crossmember.2. Disconnect the intake hose from the air filter casing.3. Remove the cold intake and intake hose assembly from the engine compartment.
