Removing
(
Refitting
)
- Position the vehicle on a lift.- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Working from inside the vehicle, act on the locking spring (1a) and disconnect the rigid pipe (1b) from the master cylinder (pump).
See in Op. 1048A21 Op. 1048A41 SLEEVE FROM DEBIMETER TO TURBOCHARGER - R R1. Release the retaining springs (1a) and remove the cover (1b).2. Remove the filter element.3. Disconnect the electrical connection (3a) for the air flow meter (3b).
Description
Connector
3a
Air flow meter
K041
4. Undo the fixing nuts (4a) and remove the air filter casing (4b).
1. Lift up the spring (1a) and disconnect the pipe (1b) from the clutch release cylinder.- Remove the pipe from the engine compartment.
Refitting
(
Removing
)
- Fit the pipe in the housing in the engine compartment.- Connect the pipe to the clutch release cylinder.- Fit the air filter casing and tighten the nuts fixing it to the mounting bracket.- Connect the electrical connection for the air flow meter.
Removing
(
Refitting
)
- Position the vehicle on a lift.- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Working from inside the vehicle, act on the locking spring (1a) and disconnect the rigid pipe (1b) from the master cylinder (pump).
