244001110 - 3330D12 BRAKE SERVO - R R FOR RIGHT HAND DRIVE VERSIONS - INCLUDES SEPARATION FROM MASTER CYLINDER(PUMP)

Removing ( Refitting ) - Position the vehicle on the lift.- Disconnect the negative battery lead.

	Description	Connector
.	Battery	A001B

    Op. 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE    Op. 3330C10 MASTER CYLINDER (PUMP) - R + R1. Working via the engine compartment, undo the nuts fixing the pedal assembly to the bodyshell. 1. Lift up the steering wheel adjustment lever.2. Undo the panel fixing bolts.3. Remove the panel, releasing it from the inner retainers.     Op. 4110A11 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECK FOR VERSIONS WITH AIR BAG    Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG    Op. 5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG    Op. 7040A20 LEFT DASHBOARD LOWER TRIM - R.R.    Op. 4110A20 STEERING WHEEL ADJUSTMENT DEVICE - CHECK    Op. 4110A31 MOUNT WITH STEERING CONTROL SHAFTS - RR - INCLUDES RR STEERING WHEEL FOR VERSIONS WITH AIR BAG    Op. 3330B42 PEDAL UNIT MOUNT - R RFOR RIGHT HAND DRIVE VERSIONS    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY See in Op. 1088B10 See in Op. 1080C17 See in Op. 1080C16 See in Op. 1048A21 See in Op. 1048B22 See in Op. 1048B14    Op. 1088D67 COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R. See in Op. 1016A10    Op. 5520C62 HEATING FLANGE FOR COLD STARTING - R.R.    Op. 5520C64 CONNECTOR BETWEEN HEATING FLANGE AND INTAKE MANIFOLD - R.R.    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1080C10    Op. 1080C50 PIPE CARRYING EXHAUST GAS TO E.G.R. VALVE - R + R See in Op. 1080C80    Op. 1072B11 INTAKE MANIFOLD - R R AND REPLACE GASKET FOR VERSIONS WITH AIR CONDITIONER1. Undo the nuts fixing the brake servo to the bodyshell.2. Disconnect the single-acting valve from the brake servo.3. Remove the brake servo from the housing. Refitting ( Removing ) - Place the brake servo in position, connect the single-acting valve and tighten the brake servo fixing nuts.

	Value - daNm	Fastening	Component	Ø
.	2.0	Nut	BRAKE SERVO	M8

- Connect the single-acting valve to the brake servo.    Op. 1072B11 INTAKE MANIFOLD - R R AND REPLACE GASKET FOR VERSIONS WITH AIR CONDITIONER See in Op. 1080C80    Op. 1080C50 PIPE CARRYING EXHAUST GAS TO E.G.R. VALVE - R + R See in Op. 1080C10    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 5520C64 CONNECTOR BETWEEN HEATING FLANGE AND INTAKE MANIFOLD - R.R.    Op. 5520C62 HEATING FLANGE FOR COLD STARTING - R.R. See in Op. 1016A10    Op. 1088D67 COOLANT PIPE BETWEEN COOLANT RESERVOIR AND THERMOSTAT - R.R. See in Op. 1048B14 See in Op. 1048B22 See in Op. 1048A21 See in Op. 1080C16 See in Op. 1080C17 See in Op. 1088B10    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY    Op. 3330B42 PEDAL UNIT MOUNT - R RFOR RIGHT HAND DRIVE VERSIONS    Op. 4110A31 MOUNT WITH STEERING CONTROL SHAFTS - RR - INCLUDES RR STEERING WHEEL FOR VERSIONS WITH AIR BAG    Op. 4110A20 STEERING WHEEL ADJUSTMENT DEVICE - CHECK    Op. 7040A20 LEFT DASHBOARD LOWER TRIM - R.R.    Op. 5520A12 IGNITION SWITCH ASSEMBLY - R R FOR VERSIONS WITH AIR BAG    Op. 4110A11 STEERING WHEEL - R+R FOR REPLACEMENT OR CHECK FOR VERSIONS WITH AIR BAG- Position the lower steering column trim and fasten it.- Position the lower dashboard trim and fasten it.- Working via the engine compartment, tighten the nuts fixing the pedal assembly to the bodyshell.

	Value - daNm	Fastening	Component	Ø
.	1.5	Nut	PEDAL MOUNT	M8

    Op. 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE    Op. 3330C10 MASTER CYLINDER (PUMP) - R + R- Connect the negative battery lead.

	Description	Connector
.	Battery	A001B

    Op. 3330A14 FRONT OR REAR HYDRAULIC BRAKE SYSTEM - BLEED- Remove the vehicle from the lift.