244001118 - 3330E46 RIGID PIPE (ONE) FROM MASTER CYLINDER PUMP TO LEFT FRONT BRAKE - R.R.

Removing ( Refitting )     Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE    Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R    Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo the left front brake pipe connector from the master cylinder.
DescriptionCodeFunction
-Polygonal spanner for brake connector1.856.132.000Loosen/tighten brake pipe connectors
    Op. 4450B02 LEFT FRONT WHEEL R R
DescriptionCodeFunction
-Polygonal spanner for brake connector1.856.132.000Loosen/tighten brake pipe connectors
- Release the rigid pipe from the springs securing it to the bodyshell.2. Remove the rigid pipe from the master cylinder to the right front brake from the lower part of the engine compartment.
Refitting ( Removing ) - Fit the rigid pipe from the master cylinder to the left front brake via the lower part of the engine compartment.- Tighten the connector for the rigid pipe to the left front flexible brake pipe.
Value - daNmFasteningComponentØ  
-1.2 - 2.2, daNmnut-M10x1
- Connect the pipe to the springs near the connector.    Op. 4450B02 LEFT FRONT WHEEL R R- Lower the vehicle.- Connect the left front brake pipe connector to the master cylinder.
Value - daNmFasteningComponentØ  
-1.2 - 2.2, daNmnut-M10x1
    Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R    Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R    Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR