244001121 - 3330E51 RIGID PIPE (ONE), LH OR RH, FROM MASTER CYLINDER TO FITTING - R R

Removing ( Refitting )     Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE    Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R    Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the bleed valve on the brake caliper.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo the connector for the rear brake pipe from the master cylinder.

	Description	Code	Function
.	Polygonal spanner for brake connector	1.856.132.000	Loosen/tighten brake pipe connectors

1. Undo the connector for the rigid pipe from the connector with the rear section of the pipe.- Release the rigid pipe from the springs securing it to the bodyshell.2. Remove the rigid pipe from the master cylinder to the rear brake pipe connector via the lower part of the engine compartment. Refitting ( Removing ) - Fit the rigid pipe from the master cylinder to the rear brake pipe connector via the lower part of the engine compartment.- Tighten the connector joining the front and rear sections of the rigid pipe.- Connect the pipe to the springs near the fuel tank.- Lower the vehicle.- Connect the connector for the rear brake pipe to the master cylinder.

	Value - daNm	Fastening	Component	Ø
.	1.2 -2.2 daNm	Nut	BRAKING SYSTEM PIPE CONNECTORS	M10x1

    Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R    Op. 5505A13 SUPPLEMENTARY JUNCTION CONTROL UNIT IN ENGINE BAY - R R    Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR