3330E52 RIGID PIPE FROM MASTER CYLINDER TO LEFT FRONT BRAKE R R - Fiat - DUCATO - eLearn

244001122 - 3330E52 RIGID PIPE FROM MASTER CYLINDER TO LEFT FRONT BRAKE R R

) - Position the vehicle on the lift.- Disconnect the negative battery lead.

	Description	Connector
.	Battery	A001B

Op. 1016A10 SOUND-PROOFING COVER - R + R- Remove the protective cap from the bleed valve on one of the front brake calipers.- Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.- Operate the brake pedal until the brake/clutch reservoir is drained.1. Undo connector (1a) and disconnect the pipe from master cylinder (1b), then release the pipe from the retaining clips.

Op. 1076B50 EXHAUST PIPE ATTACHMENT TO ENGINE - R + R Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS1. Open retaining clips (1a) and release rigid pipe (1b) from the body.

1. Use the appropriate tool to undo the connector for the rigid pipe to the left front flexible brake hose.

	Description	Code	Function
.	Polygonal spanner for brake connector	1.856.132.000	Rigid pipe from master cylinder to left front brake - R.R.

- Release the rigid pipe from the springs securing it to the bodyshell.2. Remove the rigid pipe from the master cylinder to the left front brake from the lower part of the engine compartment.

Refitting ( Removing

) - Position the pipe in the car.- Use the appropriate tool to tighten the connector joining hose and rigid pipe to the specified torque.

	Description	Code	Function
.	Polygonal spanner for brake connector	1.856.132.000	Rigid pipe from master cylinder to left front brake - R.R.

	Value - daNm	Fastening	Component	Ø
.	1.6	Connector	PIPE FRONT BRAKE RIGID FROM MASTER CYLINDER	M10X 1

- Do up the retaining clips securing the rigid pipe to the body. Op. 1040A30 OIL SEAL COVER, FLY WHEEL SIDE - R + R AND REPLACE SEALS Op. 1040A40 PLUG FOR FUEL FILLER PIPE - R + R Op. 1076B50 EXHAUST PIPE ATTACHMENT TO ENGINE - R + R- Use the appropriate tool to tighten the connector for the rigid pipe to the left front flexible brake hose to the specified torque.

	Description	Code	Function
.	Polygonal spanner for brake connector	1.856.132.000	Rigid pipe from master cylinder to left front brake - R.R.

	Value - daNm	Fastening	Component	Ø
.	1,6	Connector	RIGID PIPE FROM CLUTCH MASTER CYLINDER	M10

- Do up the retaining clips securing the rigid pipe to the body. Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR Op. 1016A10 SOUND-PROOFING COVER - R + R- Connect the negative battery lead to the battery.

	Description	Connector
.	Battery	A001B

- Remove the vehicle from the lift.