Removing
(
Refitting
)
- Position the vehicle on the lift.- Raise the vehicle.1. Working underneath the vehicle, undo the connectors for the rigid brake pipe and let the hydraulic fluid drain into a suitable container.2. Undo the connector for the rigid pipe.3. Remove the rigid pipe (3a) releasing it from the springs (3b).
Refitting
(
Removing
)
- Check that the rigid pipe is not damaged.- Position the rigid pipe and fit it to the springs.- Tighten the rigid pipe connectors.
Removing
(
Refitting
)
- Position the vehicle on the lift.- Raise the vehicle.1. Working underneath the vehicle, undo the connectors for the rigid brake pipe and let the hydraulic fluid drain into a suitable container.2. Undo the connector for the rigid pipe.3. Remove the rigid pipe (3a) releasing it from the springs (3b).