244001127 - 3330E71 RIGID PIPE FROM CONNECTOR TO LOAD PROPORTIONING VALVE - R.R. AND BLEED AIR
Removing
(
Refitting
)
- Position the vehicle on the lift.- Raise the vehicle.1. Working underneath the vehicle, undo the connectors for the rigid brake pipe and let the hydraulic fluid drain into a suitable container.2. Remove the rigid pipe (2a) releasing it from the springs (2b).
Refitting
(
Removing
)
- Check that the rigid pipe is not damaged.- Position the rigid pipe and fit it to the springs.- Tighten the rigid pipe connectors.
Removing
(
Refitting
)
- Position the vehicle on the lift.- Raise the vehicle.1. Working underneath the vehicle, undo the connectors for the rigid brake pipe and let the hydraulic fluid drain into a suitable container.2. Remove the rigid pipe (2a) releasing it from the springs (2b).