244001182 - 4410B64 BALL JOINT (ONE) ON L/H OR R/H FRONT PILLAR - REPLACE

Removing ( Refitting ) - Position the vehicle on the lift.- Remove the front wheel.    Op. 7055B54 UNDER-ENGINE GUARD - R R1. Slightly loosen the upper nut fixing the anti-roll bar connecting rod.2. Undo the lower connecting rod fixing nut.3. Keep the washer (3a) and the bush (3b).4. Undo the nut fixing the track control arm to the track rod end. 1. Extract the track rod end from the track control arm using the special tool.

	Description	Code	Function
1	Universal extractor	1.840.005.000	Track rod end extraction

	Description	Code	Function
1	Arms for universal extractor	1.840.005.301	Track rod end extraction

1. Loosen the bolts fixing the track rod end.2. Remove the track rod end. Refitting ( Removing ) - Check that the track rod end is not damaged.- Place the track rod end into position.- Tighten the bolts fixing the track rod end.

	Value - daNm	Fastening	Component	Ø
.	8.1 - 11.7	Bolt	FRONT STEERING KNUCKLE BALL JOINT	M12x1.25

- Position the track rod end on the track control arm and tighten the nut (Ducato 10 - 14 only).

	Value - daNm	Fastening	Component	Ø
.	11.1 - 16.4	Nut	TRACK CONTROL ARM	M16x1.5

- Position the track rod end on the track control arm and tighten the nut (Ducato Maxi only).

	Value - daNm	Fastening	Component	Ø
.	15.3 - 22.7	Nut	TRACK CONTROL ARM	M18x1.5

- Position the bush and the washer and tighten the lower connecting rod fixing nut.

	Value - daNm	Fastening	Component	Ø
.	5.1 - 7.4	Lower nut	ANTI-ROLL BAR CONNECTING ROD	M12x1.25

- Tighten the upper connecting rod fixing nut.

	Value - daNm	Fastening	Component	Ø
.	8.2- 11.9	Upper nut	ANTI-ROLL BAR CONNECTING ROD	M12x1.25

    Op. 7055B54 UNDER-ENGINE GUARD - R R- Refit the front wheel.- Remove the vehicle from the lift.