244001260 - 5020M80 WATER PUMP FOR ADDITIONAL HETAER UNIT - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.    Op. 5020M10 INDEPENDENT HEATER UNIT - R R1. At the bench, undo the bolts (1a) fixing the water pump bracket (1b).- Remove the band fastening the flexible pipe to the pump.2. Remove the water pump.
Refitting ( Removing ) - Place the water pump in the correct fitting position.- Fit the flexible pipe on the pump and secure it using the retaining band.- Fasten the water pump to the independent heater casing tightening the bolt fixing the pump retaining band.- Connect the negative battery terminal.    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY