244001263 - 5020M92 WIRING ON ADDITIONAL HEATER - R.R.

Removing ( Refitting ) - Disconnect the negative battery terminal.- Raise the vehicle on the lift.1. Support the weight of the heater unit and loosen the bolts (1a) and the nuts (1b) fixing the independent heater unit mounting bracket.
1. Disconnect the electrical connector for the independent heater unit and release it from the mounting bracket.
DescriptionConnector
1Additional heater control unitM075
1. Disconnect the electrical connections for the wiring from the independent heater.2. Remove the wiring for the independent heater unit.
Refitting ( Removing ) - Connect the electrical connectors for the heater unit wiring.- Connect the electrical connector for the heater unit.
DescriptionConnector
-Additional heater control unitM075
- Fasten the support for the independent heater unit to the bodyshell tightening the nuts and bolts to the recommended torque.
Value - daNmFasteningComponentØ  
-2Nut-M8
Value - daNmFasteningComponentØ  
-2Bolt-M8
- Lower the vehicle on the lift.- Connect the negative battery terminal.    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY