1. Remove the bands (1a) and (1b) retaining the heater radiator supply and return pipes.2. Undo the retaining bolts.- Open the tap control cable retaining spring.3. Disconnect the tap control cable and remove it.4. Disconnect the heater radiator supply and return pipes (4a) and (4b).5. Remove the tap.
Refitting
(
Removing
)
- Connect the tap control cable and secure it to the fastening spring.- Position the tap and connect the heater radiator supply and return pipes.- Tighten the bolts fixing the tap.- Secure the heater radiator supply and return pipes using suitable retaining bands.
Check the condition of the seal and replace it if necessary.