244001374 - 5540B24 MAIN HEADLAMP BULB (1), LH OR RH - R R

Removing ( Refitting ) - Disconnect the negative battery terminal.- Disconnect the electrical connection for headlamp.

	Description	Connector
.	Left headlamp	F010

	Description	Connector
.	Right headlamp	F011

1. Undo the headlamp retaining bolt.2. Remove the headlamp from its seat and turn on its hinge. 1. Release the bulb protection assembly. 1. Release bulb (1a) from the retaining clip, disconnect electrical connection (1b) and remove the high beam bulb (1c). Refitting ( Removing ) - Fit the high beam bulb in the housing.- Release the bulb protection assembly.- Turn th e headlamp and press fit into its housing.- Secure the headlamp with a bolt.

	Value - daNm	Fastening	Component	Ø
.	(headlamp carrier beam hinge fastener) 0.39 - 0.75	Bolt	MAIN HEADLAMP LIGHT BEAM	M6

- Disconnect the headlamp electrical connection.

	Description	Connector
.	Left headlamp	F010

	Description	Connector
.	Right headlamp	F011

- Connect the negative battery terminal electrical connection.