244001376 - 5540B28 BULB (1) FOR FRONT TURN SIGNAL IN A HEAD LAMP (1), LH OR RH - R R

Removing ( Refitting ) - Disconnect the negative battery terminal.- Disconnect the electrical connection for the headlamp.

	Description	Connector
.	Left headlamp	F010

	Description	Connector
.	Right headlamp	F011

1. Undo the headlamp retaining bolt.2. Remove the headlamp from its seat and turn on the hinge. 1. Release the headlamp protection assembly. - Disconnect the bulb retaining clips.1. Remove the bulb carrier (1a) from its seat and remove the bulb of the front light of one light cluster (1b). Refitting ( Removing ) - Fit the bulb for the front light of one light cluster.- Fit the bulb holder in its seat.- Fit the headlamp protection assembly.- Turn the headlamp and press-fit into its housing- Secure the headlamp with a bolt.

	Value - daNm	Fastening	Component	Ø
.	(headlamp carrier beam hinge fastener) 0.39 - 0.75	Bolt	MAIN HEADLAMP LIGHT BEAM	M6

- Disconnect the electrical connection for the headlamp.

	Description	Connector
.	Left headlamp	F010

	Description	Connector
.	Right headlamp	F011

- Disconnect the negative battery terminal.