244000716 - 1036B10 OVERHEAD CAMSHAFT - R R ON VEHICLE

Removing ( Refitting ) See in Op. 1048A21    Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R    Op. 5510C10 IGNITION COIL/S - R+R    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1088C30    Op. 1048A31 RIGID PIPE CONNECTING AIR CLEANER TO INLET MANIFOLD RIGID PIPE R R See in Op. 1016A20    Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R See in Op. 1092A12 See in Op. 1032D12 See in Op. 1032B14    Op. 1032B53 DRIVEN TOOTHED PULLEY (ONE) - R R FOR VERSIONS WITH AIR CONDITIONER1. Remove the lubrication pipe (1a) which is a press fit and the seals (1b).
1. Undo the nuts (1a) fixing the camshaft caps in the order indicated and remove the caps (1b).
Mark each camshaft cap so they can be fitted correctly.
2. Remove the camshaft.- Remove the camshaft front oil seal.
Refitting ( Removing ) 1. Fit the camshaft.2. Fit the camshaft caps (2a) and tighten the nuts (2b) to the recommended torque following the order given.
Value - daNmFasteningComponentØ  
2b1,6NutCAMSHAFT CAPS-
- Press fit the lubrication pipe and the seals. See in Op. 1036B36    Op. 1032B53 DRIVEN TOOTHED PULLEY (ONE) - R R FOR VERSIONS WITH AIR CONDITIONER See in Op. 1032B14 See in Op. 1032D12 See in Op. 1092A12    Op. 1092B40 AIR CONDITIONER COMPRESSOR/ALTERNATOR DRIVE BELT - R + R    Op. 1092C11 POWER STEERING PUMP DRIVE BELT - R R FOR VERSIONS WITH AIR CONDITIONER See in Op. 1016A20    Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R    Op. 5510C10 IGNITION COIL/S - R+R    Op. 7055B54 UNDER-ENGINE GUARD - R R See in Op. 1088C30    Op. 1048A31 RIGID PIPE CONNECTING AIR CLEANER TO INLET MANIFOLD RIGID PIPE R R    Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY Removing ( Refitting ) See in Op. 1016A10 See in Op. 1016A20    Op. 4450B04 RIGHT FRONT WHEEL R R    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 1092D10 AIR CONDITIONER COMPRESSOR DRIVE BELT - R + R    Op. 1092B51 ALTERNATO/WATER PUMP DRIVE BELT - R+R FOR VERSIONS WITH AIR CONDITIONER See in Op. 1092A12 See in Op. 1008B10 See in Op. 1032D12 See in Op. 1032B14    Op. 1032B61 TIMING BELT PULLEY - R R See in Op. 1036B361. Undo the fixing nuts (1a) and remove the camshaft caps (1b).3. Remove the camshaft.
Refitting ( Removing ) - Fit the camshaft in the cylinder head.- Tighten the bolts fixing the caps.- Tighten the nuts fixing the caps to torque.
Value - daNmFasteningComponentØ  
11,8NutCAMSHAFT CAPSM8
follow the progressive numbering of the camshaft caps (1 = timing side pulley) and position the caps so that the numbers stamped on them are legible from the injector side.
See in Op. 1036B36    Op. 1032B61 TIMING BELT PULLEY - R R See in Op. 1032B14 See in Op. 1032D12 See in Op. 1008B10 See in Op. 1092A12    Op. 1092B51 ALTERNATO/WATER PUMP DRIVE BELT - R+R FOR VERSIONS WITH AIR CONDITIONER    Op. 1092D10 AIR CONDITIONER COMPRESSOR DRIVE BELT - R + R    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 4450B04 RIGHT FRONT WHEEL R R See in Op. 1016A20 See in Op. 1016A10