244000721 - 1036H14 VALVE TAPPETS - CHECK CLEARANCE
See in Op. 1016A201. Position each cam facing upwards and check that the clearance corresponds to the recommended values. | Subject | Value |
|---|---|---|
| 1 | VALVE TAPPETS | mm |
| - | Inlet valve clearance check | 0,15 - 0,25 |
| - | Exhaust valve clearance check | 0,35 - 0,45 |
Removing
(
Refitting
)
See in Op. 1016A10 See in Op. 1016A20 Op. 4450B04 RIGHT FRONT WHEEL R R1. Using a feeler gauge (1a), measure the clearance (1b) between the camshaft lift and a tappet shim.- Rotate the camshaft and check the clearance for all the tappets working on the crankshaft pulley. | Subject | Value |
|---|---|---|
| . | TAPPET SHIM | mm |
| - | Inlet valves clearance in closed position | 0.45 - 0.55 |
| - | Exhaust valves clearance in closed position | 0.45 - 0.55 |
Refitting
(
Removing
)
Op. 4450B04 RIGHT FRONT WHEEL R R See in Op. 1016A20 See in Op. 1016A10