1008A42 GEAR BOX LEFT RIGID MOUNT - R R - Fiat - DUCATO - eLearn

244000629 - 1008A42 GEAR BOX LEFT RIGID MOUNT - R R

) 1. Disconnect the intake hose from the air filter casing and from the cold intake on the crossmember.2. Remove the intake hose from the engine compartment.

See in Op. 1048A101. Release the two ends (1a), move the two gear selector and engagement flexible cables (1b) out of the slot in the bracket (1c) and place them outside of the work area.

Op. 7055B54 UNDER-ENGINE GUARD - R R- Lower the vehicle and position a hydraulic arm support beneath the gearbox to support the engine.1. Remove the cover.2. Undo the nut3. Remove the idler connecting rod for the selector unit.

1. Undo the nuts fixing the gearbox side flexible mounting to the rigid support.2. Undo the bolts and the nut fixing the rigid support to the gearbox.- Gently lower the engine until the studs on the rigid support comes out of the housing in the flexible mounting.3. Remove the gearbox side rigid power unit support.

Refitting ( Removing

) - Fit the gearbox side rigid engine support.- Tighten the nuts fixing the gearbox side flexible mounting to the rigid support.

	Value - daNm	Fastening	Component	Ø
.	(Rigid mount) 5	Nuts	GEARBOX SIDE RUBBER MOUNT	M10

- Tighten the bolts and the nuts fixing the rigid support to the gearbox to torque.

	Value - daNm	Fastening	Component	Ø
.	(Gearbox) 9	Nut	GEARBOX SIDE RUBBER MOUNT	M14

	Value - daNm	Fastening	Component	Ø
.	(Gearbox) 9	Bolt	GEARBOX SIDE RUBBER MOUNT	M14

- Remove the hydraulic arm positioned previously to support the gearbox.- Fit the idler connecting rod on the gear selector and enagement assembly, tighten the nut and fit the plug. Op. 7055B54 UNDER-ENGINE GUARD - R R- Lock the ends of the gear selector and engagement flexible cables.- Secure the cables to the mounting bracket.- Fit the air supply hose to the turbocharger and secure it to the air filter casing. See in Op. 1048A10- Fit the intake hose.- Connect the intake hose to the air filter casing and to the cold intake on the crossmember.- Remove the vehicle from the lift.